DLS Ultimate (The Tube Amp) 2csatornás HiFi erősítő 2x100W
559.990 Ft
TA2
ULTIMATE series TA2 is a HiFi two-channel amplifier with 2 x 100 Watts output power. This is an extremely well-sounding amplifier for car use. We did not compromize in any section of the construction when we designed the electronic circuits.
The connection link is used to protect and cover the cable connections when installing two amplifiers side by side. Width 70 mm / 2,75". The photos show both the end cover and the connection link.
DLS Véglezáró, kábelfedő Reference erősítőkhöz
9 990 Ft
RA
The end cover is used to cover and protect the cable connections. It also gives the installation a professional look. Width 70 mm / 2,75". The photo shows both the end cover and connection link.
DLS Performance mono erősítő 1x220W 4ohm
79.990 Ft
CA12
Specifikáció
Number of channels
1
Amplifier class
AB
Output power in 4 ohm
220 W
Output power in 2 ohm
400 W
Output power in 1 ohm
500 W
Mono bridge mode 4 ohm
N/A
Damping factor
> 100
S/N ratio, A-weighted
> 100 dB
Frequency range
10 Hz - 35 kHz
Low level output
No
Input sensitivity
0,25 - 5 V
Input impedance
> 10 kohm
Input impedance, high level
100 ohm
High pass filter
15 - 150 Hz
Low pass filter
50 - 500 Hz
Phase control for subwoofers
0-180 degrees con. variable
High level input with auto start
Yes
Power consumption (idle)
0,8 A
Power consumption (max)
60 A
Rec. power cable
Minimum 5AWG / 16 mm2
Fuses
2 x 30 A
Dimension (W x D x H)
70 x 312 x 268 mm / 2,92 x 12,28 x 10,55"
Weight
3,8 kg / 8,4 lb
DLS Performance sztereó erősítő 2x60W
59.990 Ft
CA22
Specifikáció
Number of channels
2
Amplifier class
AB
Output power in 4 ohm
2 x 60 W
Output power in 2 ohm
2 x 100 W
Mono bridge mode 4 ohm
200 W
Damping factor
>100
S/N ratio, A-weighted
>100 dB
Frequency range
10 Hz - 35 kHz
Input sensitivity
0,25 - 5 V
Input impedance
>10 kohm
Input impedance, high level
100 ohm
High pass filter
15-500 Hz
Low pass filter
50 - 500 Hz
Low level output
Yes
High level input with auto start
Yes
Power consumption (idle)
0,5 A
Power consumption (max)
25 A
Rec. power cable
Minimum 5AWG / 16 mm2
Fuses
1 x 25 A
Dimension (W x D x H)
70 x 230 x 268 mm / 2,92 x 9,06 x 10,55"
Weight
2,7 kg / 5,95 lb
DLS Performance 2 csatornás erősítő 2x135W
79.990 Ft
CA23
Specifikáció
Number of channels
2
Amplifier class
AB
Output power in 4 ohm
2 x 135 W
Output power in 2 ohm
2 x 200 W
Mono bridge mode 4 ohm
400 W
Damping factor
>100
S/N ratio, A-weighted
>100 dB
Frequency range
10 Hz - 35 kHz
Input sensitivity
0,25 - 5 V
Input impedance
> 10 kohm
Input impedance, high level
100 ohm
High pass filter
15 - 150 Hz
Low pass filter
50 - 500 Hz
Grand bass filter
25 - 80 Hz, 0-18 dB
Low level output
Yes
High level input with auto start
Yes
Power consumption (idle)
0,7 A
Power consumption (max)
60 A
Rec. power cable
Minimum 5AWG / 16 mm2
Dimension (W x D x H)
70 x 312 x 268 mm (2,92 x 12,28 x 10,55 inch)
Fuses
2 x 30 A
Weight
3,6 kg ( 7,9 lb)
DLS Performance 3 csat. erősítő 2x65W 1x170W
89.990 Ft
CA31
Specifikáció
Number of channels
3
Amplifier class
AB
Output power in 4 ohm
2 x 65 W
Output power in 2 ohm
2 x 90 W
Mono sub channel 4 ohm
170 W
Mono bridge mode 4 ohm
N/A
Mono sub channel 2 ohm
280 W
Damping factor
>100
S/N ratio, A-weighted
>100 dB
Frequency range
10 Hz - 35 kHz
Input sensitivity
0,25 - 5 V
Input impedance
>10 kohm
Input impedance, high level
100 ohm
Filters channel A & B
HP: 50-150 Hz
Filter sub channel
Lowpass: 50 - 120 Hz + subsonic 25 Hz
Low level output
No
High level input with auto start
Yes
Power consumption (idle)
1A
Power consumption (max)
60A
Rec. power cable
Minimum 4AWG / 21 mm2
Fuses
2 x 30 A
Dimension (W x D x H)
70 x 357 x 268 mm (2,92 x 14,06 x 10,55 inch)
Weight
4 kg ( 8,8 lb)
DLS Performance 3 csat. erősítő 2x75W 1x170W 24V
99 990 Ft
CAT31
Specifikáció
Number of channels
3
Amplifier class
AB
Output power in 4 ohm
2 x 75 W
Mono bridge mode 4 ohm
N/A
Output power in 2 ohm
2 x 145 W
Mono sub channel 4 ohm
170 W
Mono sub channel 2 ohm
280 W
Damping factor
> 100
S/N ratio, A-weighted
> 100 dB
Frequency range
10 Hz - 35 kHz
Input sensitivity
0,25 - 5 V
Input impedance
> 10 kohm
Input impedance, high level
100 ohm
High level input with auto start
Yes
Filters channel A & B
HP: 50-150 Hz.
Low level output
No
Voltage
24 - 30 Volt DC
Power consumption (idle)
0,7
Power consumption (max)
40 A
Rec. power cable
Minimum 7AWG / 10 mm2
Fuses
2 x 20 A
Dimension (W x D x H)
70 x 357 x 268 mm (2,92 x 14,06 x 10,55")
Weight
4 kg ( 8,8 lb)
DLS Performance 4 csatornás erősítő 4x70W
99 990 Ft
CA41
Specifikáció
Number of channels
4
Amplifier class
AB
Output power in 4 ohm
4 x 70 W
Output power in 2 ohm
4 x 125 W
Mono bridge mode 4 ohm
2 x 200 W
Damping factor
>100
S/N ratio, A-weighted
> 100 dB
Frequency range
10 Hz - 35 kHz
Input sensitivity
0,25 - 5 V
Input impedance
>10 kohm
Input impedance, high level
100 ohm
Filters channel A & B
HP: 15-500 Hz. LP: 50-500 Hz / 0,5 - 5 kHz (x10)
Filters channel C & D
HP: 15-500 Hz / 150 Hz - 5 kHz (x10)
Grand bass filter
0-18 dB @ 25-80 Hz
Low level output
Yes
High level input with auto start
Yes
Power consumption (idle)
0,7 A
Power consumption (max)
60 A
Rec. power cable
Minimum 4AWG / 21 mm2
Fuses
2 x 30 A
Dimension (W x D x H)
70 x 372 mm x 268 mm (2,92 x 14,65 x 10,55 inches)
Weight
4,2 kg ( 9,3 lb)
DLS Performance 5 csat. erősítő 4x50W 1x170W
119.990 Ft
CA51
Specifikáció
Number of channels
5
Amplifier class
AB
Output power in 4 ohm
4 x 50 W
Output power in 2 ohm
4 x 80 W
Mono bridge mode 4 ohm
2 x 150 W
Mono sub channel 4 ohm
170 W
Mono sub channel 2 ohm
225 W
Damping factor
> 100
S/N ratio, A-weighted
> 100 dB
Frequency range
10 Hz - 35 kHz
Input sensitivity
0,25 - 5 V
Input impedance
> 10 kohm
Input impedance, high level
100 ohm
Filters channel A & B
HP: 15-500 Hz. LP: 50-500 Hz / 05 - 5 kHz (x10)
Low level output
No
Filters channel C & D
HP: 15-500 Hz / 150 Hz - 5 kHz (x10).
Filters channel E
LP: 60 - 120 Hz + subsonic 25 Hz
High level input with auto start
Yes
Power consumption (idle)
1 A
Power consumption (max)
90 A
Rec. power cable
Minimum 4AWG / 21 mm2
Fuses
3 x 30 A
Dimension (W x D x H)
70 x 437 x 268 mm / 2,92 x 17,2 x 10,55 "
Weight
5 kg / 11 lb
DLS Performance mono erősítő 400W 4ohm
179.990 Ft
CAD11
Specifikáció
Dimension (W x D x H)
70 x 444 x 268 mm (2,92 x 17,48 x 10,55 inches)
Number of channels
1
Amplifier class
D
Output power in 4 ohm
400 W (0,4% THD)
Output power in 2 ohm
750 W (0,7% THD)
Output power in 1 ohm
1050 W (1% THD)
Mono bridge mode 4 ohm
N/A
Damping factor
>100
S/N ratio, A-weighted
>100 dB
Input sensitivity
0,15 - 5 V
Input impedance
>10 kohm
Input impedance, high level
100 ohm
High pass filter
N/A
Low pass filter
15 - 150 Hz / 24 dB
Subsonic filter
15 - 50 Hz / 24 dB
Frequency range
15 Hz - 160 Hz
Grand bass filter
0 - +18 dB @45 Hz
Low level output
No
Remote bass level control
Yes
Integrated fan
Yes
High level input with auto start
Yes
Power consumption (idle)
1,5 A
Power consumption (max)
120 A
Rec. power cable
Minimum 2AWG / 33 mm2
Fuses
4 x 30 A
Weight
5,8 kg / 12,8 lb
DLS Performance D osztályú mono erősítő 550W 4ohm
199.990 Ft
CAD15
Specifikáció
Number of channels
1
Amplifier class
D
Output power in 4 ohm
550 W
Output power in 2 ohm
900 W
Output power in 1 ohm
1600 W
Mono bridge mode 4 ohm
N/A
Damping factor
> 100
S/N ratio, A-weighted
> 100 dB
Frequency range
15 - 160 Hz
Input sensitivity
0,15 - 5 V
Input impedance
> 10 kohm
Input impedance, high level
100 ohm
High pass filter
15-50 Hz / 24 dB slope
Low pass filter
15-150 Hz / 24 dB slope
Phase control for subwoofers
0-180 grader kont. variabel
Low level output
No
Grand bass filter
0-+18 dB@45 Hz
Remote bass level control
Yes
High level input with auto start
Yes
Integrated fan
Yes
Power consumption (idle)
2 A
Power consumption (max)
160 A
Rec. power cable
Minimum 2AWG / 33 mm2
Fuses
4 x 40 A
Dimension (W x D x H)
70 x 473 x 268 mm (2,92 x 18,62 x 10,55 inches)
Weight
6,4 kg ( 14,3 lb)
DLS Connecting Link Performance erősítőkhöz
9 990 Ft
CA
The connection link is used to protect and cover the cable connections when installing two amplifiers side by side. Width 75 mm. The photo shows both the end cover and the connection link.
DLS Véglezáró, kábelfedő Performance erősítőkhöz
12 990 Ft
CA
The end cover is used to cover and protect the cable connections. It also gives the installation a professional look. Width 75 mm / 3". The photo shows both the end cover and connection link.
Reference SBA185 mono 180W subwoofer erősítő
94 990 Ft
Reference SBA185
Specifikáció
Number of channels
1
Amplifier class
AB
Output power in 4 ohm
180 W
Output power in 2 ohm
265 W
Frequency range
25-160 Hz
Input sensitivity
0,2-7 V
Input impedance
10 kohm
Input impedance, high level
300 ohm
Low pass filter
50 - 250 Hz
High pass filter
Subsonic 25 Hz
Phase control for subwoofers
Adjustable 0 - 180 degrees
Low level output
No
High level input with auto start
Yes
Rec. power cable
Minimum 7AWG / 10 mm2
Dimension (W x D x H)
255 x 160 x 66 /10 x 6,3 x 2,6
Weight
1,4 kg (3,1 lb)
Kosár tartalma
A kosár üres
5% kedvezmény
-5% minden fejegységre, a weblapra történő hivatkozás esetén